Verifying Unverified Certificates (Release Number 2 And Later); Resetting The Calibration Reminder Due Date, Performing Calibration Correction (/Ah) (Release Number 3 And Later) - YOKOGAWA SMARTDAC+ GX10 User Manual

2.4.11 Verifying Unverified Certificates (Release number 2 and later)
Procedure
2.4.12 Resetting the Calibration Reminder Due Date, Performing Calibration
Correction (/AH) (Release number 3 and later)
IM 04L51B01-01EN
If a certificate that you have fails verification and FTP transfer or mail transmission is not
possible, an error message (E782) appears, and a Unverified certificate icon appears in the
Universal menu.
FTP transfer or mail transmission will not be possible until a verification confirmation is
performed, a root certificate is installed, or other appropriate measure is taken.
When verification confirmation is performed, data that was not transmitted will be transmitted
in the next transmission opportunity.
1
Press MENU, tap Universal and then Unverified certificate.
A Select unverified certificate screen appears.
2
From the available buttons, tap the server to display the certificate information.
The certificate information appears, and you will be prompted to install a root certificate or confirm
the certificate.
3
Check the information, and tap OK.
Clicking Cancel aborts the procedure and the Select unverified certificate screen
closes.
Operation complete
Certificate Information
Item
Validity
Verification
Issuer
Subject
Valid not before
Valid not after
Hash value (SHA1)
See page 1-224 in section 1.28.3, "Resetting the Calibration Reminder Due Date,
Performing Calibration Correction".
2.4 Executing Various Functions
Description
OK or not OK
OK or not OK
Name of the issuer
Subject
Start date and time of validity
End date and time of validity
Hash value
1
2
3
4
5
App
Index
2-63