Changing The Password - YOKOGAWA SMARTDAC+ GX10 User Manual

2.10.2 Changing the Password
Procedure
IM 04L51B01-01EN
Logging Out
• Using Touch Operation
1
Press MENU.
The menu screen appears.
2
Tap the Universal tab and then Logout.
You are logged out. The user name disappears from the status display section.
Operation complete
• Auto Logout
If auto logout is enabled, you will be logged out when there is no key or touch operation
for the specified length of time.
You can carry out this procedure when in Security settings, under Basic settings, Security
Touch operation is set to Login.
1
Press MENU.
The menu screen appears. If Operation without Login is set to OFF, a password input screen
will appear.
2
Tap the Universal tab and then Change password.
The screen for changing the password appears.
3
Tap Old Password, and enter the old password.
4
Tap New Password, and enter the new password.
5
Tap New Password Again, and enter the new password.
6
Tap OK.
The screen closes, and the new password takes effect.
7
Tap the Exit icon to close the menu screen.
Operation complete
Note
Default password: default
For the default password when you are using the advanced security function (/AS option), see
section 2.3.1, "Logging In," in the Advanced Security Function (/AS) User's Manual (IM 04L51B01-
05EN).
2.10 Allowing Only Registered Users to Operate
1
2
3
4
5
App
Index
2-79