Starting, Stopping, And Resetting Computation - YOKOGAWA SMARTDAC+ GX10 User Manual

2.1.4

Starting, Stopping, and Resetting Computation

Procedure
IM 04L51B01-01EN
Note
If the file type of the recording mode is Event, the trend interval will correspond to the recording
•
interval of event data.
• If the recording mode of event data is set to trigger in basic settings under recording settings,
digital values will be updated, but waveform data will not be displayed until a trigger occurs.
To display waveform data, set Trend rate switching under Display settings to On.
Staring Computation
• Starting Computation When Recording Starts
See page 2-1 in section 2.1.1, "Starting and Stopping Recording".
• Starting Only the Computation
1
Press MENU.
The menu screen appears.
2
Tap Computing.
The Start math computations screen appears.
3
Tap Start.
Computation starts. The math icon is displayed in the status display section.
Operation complete
2.1 Starting and Stopping Recording and Computation
Math
Math icon
2-7
1
2
3
4
5
App
Index