Setting The Display - YOKOGAWA SMARTDAC+ GX10 User Manual

1.5 Configuring DO Channels (Digital output channels)
1.5.2

Setting the Display

Path
Description
1-58
GX/GP: MENU key > Browse tab > Setting > Setting menu DO channel settings >
Display settings
Web application: Config. tab > DO channel settings > Channel range (display example:
0701-0706) > Display settings
Hardware configurator: DO channel settings > Channel range (display example: 0701-
0706) > Display settings
Setup Item
First-CH
Last-CH
First-CH, Last-CH
Select the target channels. The channels that you can specify appear depending on the
module configuration.
Tag
Setup Item
Characters
No.
Characters
Set the tag.
Not all characters may be displayed due to space constraints.
No.
Set the tag number.
Color
Setup Item
Color
Color
Set channel display colors. The colors apply to the trend display and bar graph display.
For instructions on how to set the user-defined color, see page 1-23 in section 1.2.3, "Setting
the Display".
Zone
Setup Item
Lower
Upper
Lower and Upper
Set these values when you want to divide the waveform displays of channels into
separate zones so that waveforms do not overlap. Set the Lower and Upper positions as
percentages of the maximum display width. Set Lower to a value less than Upper, and set
the zone width (Upper – Lower) to be 5% or greater.
Selectable Range or Options
DO channel
DO channel
Selectable Range or Options
Character string (up to 32 characters,
Character string (up to 16 characters,
Selectable Range or Options
24 colors (red, green, blue, blue violet, brown,
orange, yellow-green, light blue, violet, gray,
lime, cyan, dark blue, yellow, light gray, purple,
black, pink, light brown, light green, dark gray,
olive, dark cyan, and spring green) and a user-
defined color (1 color)
Selectable Range or Options
0 to 95%
5 to 100%
Default Value
—
—
Default Value
—
A a # 1
)
—
A a # 1
)
Default Value
—
Default Value
0
100
IM 04L51B01-01EN