1.5.2
Writing to the CPU module
Open the "Online Data Operation" dialog box. In this chapter, a project is written to the program memory.
[Online]
2) Selecting this will
automatically select the
parameter and program
checkboxes.
The project has been written. In the next procedure, execute the program.
Note that parameter setting is required to operate CPU modules. In this chapter, the procedure for parameter setting is not
introduced since default values are used. (
[Write to PLC...]
Page 428, Appendix 1)
CHAPTER 1 BASIC PROCEDURE FOR PROGRAMMING
1
1) Select the program
memory.
31