Mitsubishi Electric Q01UCPU User Manual page 467

*1 Some models do not support the function. For details, refer to the corresponding reference.
*2 Use the Universal model QCPU whose serial number (first five digits) is "10042" or later to store data of the extended
data register (D) and extended link register (W) in the standard ROM using the latch data backup function.
( Page 251, Section 3.29).
*3 Communication using the A-compatible 1E frame is available only via any Ethernet module.
If the module is connected to the built-in Ethernet port of the CPU module, this function is not available.
*4 Communication using the A-compatible 1C frame is available only via any serial communication module.
If the module is connected to the built-in RS-232 interface of the CPU module, this function is not available.
*5 For the versions of the intelligent function modules that support the function, refer to the manual for the intelligent
function module used.
*6 The serial number (first five digits) differs depending on the CPU module.
• Q13UDHCPU, Q26UDHCPU: "10011" or later
• CPU modules other than above: "10012" or later
*7 Only the QnUDVCPU supports this function.
*8 The serial number (first five digits) differs depending on the CPU module.
• QnUDE(H)CPU: "14112" or later
• QnUDVCPU: "15043" or later
*9 The serial number (first five digits) differs depending on the CPU module.
• QnU(D)(H)CPU, QnUDE(H)CPU: "14112" or later
• QnUDVCPU: "15043" or later
*10 The serial number (first five digits) differs depending on the CPU module.
• QnUD(E)(H)CPU: "14072" or later
• QnUDVCPU: "16043" or later
APPENDICES
A
465