Mitsubishi Electric Q01UCPU User Manual page 465

Function
Module model name read ( Page 294, Section 3.33)
*1 *5
Module error collection function (
*1
IP address change function (
(Communication via Built-in Ethernet Port))
*1
Local device batch read function (
CC-Link IE Field Network ( MELSEC-Q CC-Link IE Field Network
Master/Local Module User's Manual)
*5
Send points extension function (CC-Link IE Controller Network module)
( Page 301, Section 3.36)
Online change of inactive blocks (SFC)
Programming Manual (SFC))
Expansion of SFC step relay points (
Operation mode setting at SFC double block START
Q/L/QnA Programming Manual (SFC))
*1
SFC comment readout instruction (
Manual (SFC))
Data up to 10238 bytes can be exchanged with the
SP.SOCSND/S(P).SOCRCV(S)/S(P).SOCRDATA instructions
( QnUCPU User's Manual (Communication via Built-in Ethernet Port))
Parameter-valid drive information (
Program cache memory auto recovery function (
3.28)
Extension of available index register range (Z0 to Z19) when Jn and Un are
used in the dedicated instruction (
the intelligent function module used)
Storage of device memory error information (Memory check function)
( QCPU User's Manual (Hardware Design, Maintenance and
Inspection))
Storage of program error location (Memory check function) (
User's Manual (Hardware Design, Maintenance and Inspection))
Serial communication function
(Q03UD/Q04UDH/Q06UDH/Q10UDH/Q13UDH/Q20UDH/Q26UDHCPU)
( Page 230, Section 3.23)
SFC control target block switching (
Manual (SFC))
AnS/A series compatible extension base unit
Communication using the A-compatible 1E frame (MC protocol) through built-
in Ethernet port ( MELSEC-Q/L MELSEC Communication Protocol
Reference Manual)
IP packet transfer function (CC-Link IE Field Network) (
User's Manual (Communication via Built-in Ethernet Port))
Own station number setting function for CC-Link IE Field Network
( MELSEC-Q CC-Link IE Field Network Master/Local Module User's
Manual)
Writing/reading data to/from refresh devices with the specified station
*1
number ( MELSEC-Q/L Programming Manual (Common Instruction))
Page 295, Section 3.34)
QnUCPU User's Manual
Page 299, Section 3.35)
*1
( MELSEC-Q/L/QnA
Page 341, Section 4.2)
*1
( MELSEC-
MELSEC-Q/L/QnA Programming
*1
Page 41, Section 2.1.2)
Page 249, Section
Manuals for the network module and
QCPU
MELSEC-Q/L/QnA Programming
QnUCPU
*1 *5
Function Serial number
version (first 5 digits)
"11043" or later
"11082" or later
"12012" or later
"12052" or later
–
B
"12122" or later
"13022" or later
"13042" or later
"13062" or later
"13102" or later
"14022" or later
"14042" or later
*10
APPENDICES
Programming tool version
GX Works2 GX Developer
Version 1.15R Version 8.82L
or later or later
Version 1.12N
×
or later
– –
Version 1.31H
or later
Version 1.40S
or later
×
–
Version 1.40S
×
or later
– –
Version 1.62Q
×
or later
Version 1.73B
×
or later
– –
Version 1.77F
×
or later
Version 1.87R
×
or later
– –
463
A