Appendix 2 Functions Added Or Changed By Version Upgrade - Mitsubishi Electric Q01UCPU User Manual

Appendix 2
The Universal model QCPU is upgraded when some functions are added or specifications are changed. Therefore, the
functions and specifications differ depending on the function version and serial number.
*1
Use of the PC CPU module (
System))
Setting of whether to use local device for each program (
Section 6.2)
Program memory batch transfer execution status check (SM165)
( Page 36, Section 2.1.1 (1) (d))
Multiple CPU high-speed transmission dedicated instruction
( MELSEC-Q/L Programming Manual (Common Instruction))
Display of the amount of battery consumption (
(Hardware Design, Maintenance and Inspection))
Bit device extension ( Page 341, Section 4.2)
Executional conditioned device test (
Sampling trace auto start function
CC-Link IE group cyclic transmission function (
Network Reference Manual)
Scan time measurement (
External input/output forced on/off (
*1
Monitor condition setting (
Redundant power supply system
32-bit indexing with "ZZ" specification (
Manual (Common Instruction))
Extended data register (D) and extended link register (W)
398, Section 4.8)
Serial communication function (Q02UCPU) (
CPU module change function with memory card
3.31)
Local device setting of the index register
1.2.8)
Communication using the A-compatible 1C/1E frame (MC protocol)
( MELSEC-Q/L MELSEC Communication Protocol Reference Manual)
A QnA converted special relay/special register (SM1000 to SM1255,
SD1000 to SD1255) ( QCPU User's Manual (Hardware Design,
Maintenance and Inspection))
*1
Socket communication function
(Communication via Built-in Ethernet Port))
462
Functions Added or Changed by Version
Upgrade
Function
QCPU User's Manual (Multiple CPU
Page 418,
*1
QCPU User's Manual
Page 157, Section 3.11.4)
*1
( Page 182, Section 3.14)
CC-Link IE Controller
Page 179, Section 3.13.3)
Page 152, Section 3.11.3)
Page 144, Section 3.11.1)
*1
( Page 439, Appendix 1.2.4)
MELSEC-Q/L Programming
*1 *2
(
Page 230, Section 3.23)
*1
( Page 257, Section
*1
( Page 444, Appendix
( QnUCPU User's Manual
× : Not supported,
Function Serial number
version (first 5 digits)
B
Page
"09042" or later
*3 *4
: Not related to the programming tool
–
Programming tool version
GX Works2
"09072" or later
*6
Version 1.15R
or later
"10042" or later
Version 1.73B
or later
*1
Version 1.15R
"10102" or later
or later
"10102" or later
"11012" or later
GX Developer
–
Version 8.62Q
or later
–
Version 8.68W
or later
Version 8.70Y
or later
Version 8.76E
or later
Version 8.78G
or later