Factors That Increase The Scan Time - Mitsubishi Electric Q01UCPU User Manual

Appendix 3.3
When executing any of the functions or operations described in this section, add the given processing time in this
section to the time value calculated in Page 466, Appendix 3.1.
(1) Sampling trace
When the sampling trace function (
following table is required.
[Conditions] Processing time (when 50 points of the internal relay (for bit device) and 50 points of the data register
(for word device) are set as sampling trace data)
Q00UCPU, Q01UCPU
Q02UCPU
Q03UD(E)CPU
Q04UD(E)HCPU, Q06UD(E)HCPU, Q10UD(E)HCPU,
Standard RAM Q13UD(E)HCPU, Q20UD(E)HCPU, Q26UD(E)HCPU
Q50UDEHCPU, Q100UDEHCPU
Q03UDVCPU
Q04UDVCPU, Q06UDVCPU, Q13UDVCPU,
Q26UDVCPU
Standard RAM
Q03UDVCPU, Q04UDVCPU, Q06UDVCPU,
(with an extended
Q13UDVCPU, Q26UDVCPU
SRAM cassette)
Q02UCPU
Q03UD(E)CPU
SRAM card
Q04UD(E)HCPU, Q06UD(E)HCPU, Q10UD(E)HCPU,
Q13UD(E)HCPU, Q20UD(E)HCPU, Q26UD(E)HCPU
Q50UDEHCPU, Q100UDEHCPU
*1 When specifying devices in the trigger point setting, the scan time may be increased by up to 0.163µs per instruction.
476

Factors that increase the scan time

Page 182, Section 3.14) is executed, the processing time listed in the
CPU module Processing time
0.12ms
0.09ms
*1
0.07ms
*1
0.06ms
0.06ms
*1
0.045ms
*1
0.045ms
*1
0.05ms
0.09ms
*1
0.08ms
*1
0.06ms
0.06ms