Chapter 2 Application Of Programming; Memory And Files; Memory Configuration And Storable Data - Mitsubishi Electric Q01UCPU User Manual

CHAPTER 2
2.1

Memory and Files

2.1.1

Memory configuration and storable data

Memory configuration differs depending on the CPU module (refer to the following).
CPU module
Q00UJCPU
Q00UCPU, Q01UCPU
Q02UCPU, QnUD(H)CPU, QnUDE(H)CPU
QnUDVCPU
(1) Program memory
This memory stores programs and parameters required in processing of the CPU module.
(a) Processing a program
When a program is executed, data in the program memory are transferred to the program cache memory
the following timings.
• Initial processing at power-on
• Initial processing at reset
*1 The program cache memory is used for program operations.
(b) Writing to the program memory
When a program is written to the program memory, it is temporarily written to the program cache memory, and
then automatically transferred back to the program memory.
1) Data are written to the program
cache memory first.
Programming tool
While the CPU module is in the RUN status, automatic data transfer to the program memory can be disabled by setting.
( Page 171, Section 3.12.3)
APPLICATION OF PROGRAMMING
Program memory, standard ROM
Program memory, standard RAM, standard ROM
Program memory, standard RAM, standard ROM, memory card
(SRAM card, Flash card, or ATA card)
Program memory, standard RAM, standard ROM, SD memory card
Inside CPU module
Program
cache
memory
(SRAM)
<Drive 3> <Drive 4>
Standard RAM Standard ROM
(SRAM) (flash ROM)

CHAPTER 2 APPLICATION OF PROGRAMMING

Memory configuration
<Drive 0>
Program
memory
(flash ROM)
2) After writing to the program
cache memory, the data are
automatically transferred to
the program memory.
2
*1
at
35