Operation History Save Function - Mitsubishi Electric Q01UCPU User Manual

3.38.1

Operation history save function

This function saves the memory operation history in the save destination set in the PLC parameter.
(1) Operation histories to be saved
The following table lists the operation histories to be saved.
Operation from the
programming tool
Writing to device
Others
Operation from the
programming tool
Writing to file
Others
Operation from the
Clear operation
programming tool
Operation from the
programming tool
Clock setting
Others
Operation to the Operation from the
operation history file programming tool
Operation and function
• Current value change using watch/monitor
• Remote RUN when clearing is specified in the clear mode
• Remote latch clear
• Registration of external input/output forced on/off function
• Registration of executional conditioned device test
• Device data writing using the SLMP/MC protocol (
(a))
• Device data writing by instructions (
• Device data writing by FTP (
• Device data writing from the programmable controller in another station or another CPU
module
• Simple PLC communication function ("Write" or "Transfer" from the communication
destination)
• Latch clear by using the special relay and special register areas
• Write to PLC
• Online Change
• Clear all file registers
• Writing protocol setting data of the predefined protocol support function
• Writing the data logging setting
• Change TC setting value
• Writing files using the SLMP/MC protocol (
• Writing files by instruction (
• Writing files by FTP ( Page 316, Section 3.38.1 (1) (c))
• Change TC setting value from GOT
• Clear device's whole memory
*3*4
• Format PLC memory
• Delete PLC data
Clock setting with the programming tool (excluding the time adjustment using SNTP)
• Clock setting by the DATEWR/REQ/RTMWR instruction
• Clock setting by the special relay (SM210, SM1025)
*3
• Clearing the operation history
• Creating a new operation history file
CHAPTER 3 FUNCTIONS
*1
*1
*1
Page 315, Section 3.38.1 (1)
Page 316, Section 3.38.1 (1) (b))
Page 316, Section 3.38.1 (1) (c))
Page 315, Section 3.38.1 (1) (a))
Page 316, Section 3.38.1 (1) (b))
*5
3
*2
313