Mitsubishi Electric Q01UCPU User Manual page 60

(2) I/O assignment
The I/O assignment is set on the I/O Assignment tab of the PLC parameter dialog box.
On the I/O Assignment tab, the following items can be set for each slot on the base unit.
• "Type" (module type)
• "Points" (I/O points)
• "Start XY" (start I/O number)
To change the I/O number of the specified slot, setting is allowed only to the number of points.
Ex.
For other items that are not set, settings are completed based on the installation status of the base unit.
Item
The slot number and location of the slot are displayed. When the base unit is set to auto mode, the base unit number is
Slot
indicated in "*", and the slot number is counted from slot 0 of the main base unit.
Select the type of the mounted module from the following:
•
Empty (empty slot)
Type
(I/O combined module)
When the type is not specified for a slot, the type of the actually mounted module applies.
Enter the model names of mounted modules within 16 characters. CPU modules do not use entered model names.
Model Name
(Use the entered model names for reference.)
When changing the number of I/O points for each slot, select the points from the following:
•
0 Point
Points
When the number of points is not specified for a slot, the number of points of the actually mounted module applies. For
empty slots, the number of points set on the PLC System tab of the PLC parameter dialog box is assigned (default: 16
Points).
When changing the I/O number of each slot, enter a new start I/O number.
Start XY When this item is not specified for a slot, the I/O number counting from the last number of the current setting is
assigned.
58
•
Input (input module)
•
Intelligent (intelligent function module)
• • •
16 Points 32 Points 48 Points
Description
•
Hi. Input (high-speed input module)
•
Interrupt (interrupt module)
• • •
64 Points 128 Points 256 Points
• •
Output (output module) I/O Mix
• •
512 Points 1024 Points