Aastra 6730i Administrator's Manual page 719

Parameter–
use lldp elin
Description
Format
Default Value
Range
Example
Parameter–
lldp startinterval
Description
Format
Default Value
Range
Example
Parameter–
lldp optional inventory manage-
ment tlv
Description
Format
Default Value
Range
Example
41-001343-02 REV05 – 07.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables or disables the use of an Emergency Location Identification Number (ELIN) received
from LLDP as a caller ID for emergency numbers.
Boolean
1 (enabled)
0 (disabled)
1 (enabled)
use lldp elin: 0
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Aastra IP Phones have a 32 second time-out interval for listening to LLDP-MED responses
when the phone is booting up. If LLDP-MED responses are received after this initial listening
period, the phone will ignore the response. This "lldp startinterval" parameter can be used to
configure the time-out interval. This parameter is only valid during the phone bootup proc-
ess.
Integer
32 (seconds)
0- 65535 (seconds)
lldp startinterval: 7
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Implements either all of the LLDP-MED Inventory Management TLV sets or none of the sets.
Integer
1 (send all LLDP-MED Inventory Management TLV sets)
0-1
0 (do not send any LLDP-MED Inventory Management TLV sets)
1 (send all LLDP-MED Inventory Management TLV sets)
lldp optional inventory management tlv: 0
Operational, Basic, and Advanced Parameters
A-113