Park And Pickup Settings - Aastra 6730i Administrator's Manual

Parameter–
map conf as dtmf
Description
Format
Default Value
Range
Example

Park and Pickup Settings

Parameter–
sip park pickup config (global)
sip lineN park pickup config
(per line)
Description
Format
Default Value
Range
Example
41-001343-02 REV05 – 07.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Allows the phone to send the stored number as DTMF using the phone configured DTMF
method when the "Conf" key is pressed.
Boolean
0
0-1
0 (Disabled)
1 (Enabled)
map conf as dtmf: 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the code to enter before entering the extension for where you want to park an
incoming call. The applicable value is dependant on the type of server in the network:
Server/Park & Pickup Values*
Asterisk 70;70;asterisk
Sylantro *98;*99;sylantro
BroadWorks *68;*88;broadworks
ININ PBX callpark;pickup;inin
*Leave "value" fields blank to disable the park and pickup feature.
For BroadSoft BroadWorks the following syntax is applicable:
<park_code>,<park_dial_code>;<pickup_code>,
<pickup_dial_code>;broadworks
Note:
Pauses can be introduced in the park and pick up dial codes by adding commas. Each
comma amounts to approximate 500ms.
Alphanumeric characters
<Blank>
See applicable values in table above.
sip lineN park pickup config: *68;*88;broadworks
or
sip park pickup config: *68,,,,,,,42;*88,,,,,,,42;broadworks
Operational, Basic, and Advanced Parameters
A-155