Aastra 6730i Administrator's Manual page 804

Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key
Description (continued)
Format
Default value
Range
Example
A-198
When a key is configured for BLF/List functionality, this parameter controls the ring
tone per key. The following ring tones are available:
• Ring tone 1
• Ring tone 2
• Ring tone 3
• Ring tone 4
• Ring tone 5
• Ring tone 6
• Ring tone 7
• Ring tone 8
• Ring tone 9
• Ring tone 10
• Ring tone 11
• Ring tone 12
• Ring tone 13
• Ring tone 14
• Ring tone 15
• Silence (ring tone off )
Note:
Ring tones are based on the current ring tone set configured on the IP phone.
Integer
For BLF For BLF/List
0 (Silence) 100 (Ring tone 1)
For BLF
0-6
0 (Silence)
1 (Normal)
2 (Normal delayed)
3 (Periodic)
4 (Periodic delayed)
5 (Low volume)
6 (Low volume delayed)
7 (The behavior is determined by the global
parameter "play a ring splash".
– If "play a ring splash" is defined as 0 then
the feature is disabled.
– If "play a ring splash" is defined as 1 then
the behavior is the same as Normal.
– If "play a ring splash" is defined as 2 then
the behavior is the same as Normal but the
ring splash plays when idle and also during
the active call state).
8 (In call delayed)
9 (In call periodic)
10 (In call periodic delayed)
11 (In call low volume)
12 (In call low volume delayed)
Note:
BLF alerting patterns 7 - 11 are applicable to the 6735i, 6737i, 6739i, 6755i, 6757i, 6757i
CT, 6865i, and 6867i IP phones only.
For BLF:
prgkey1 ring splash: 1
For BLF/List:
prgkey1 ring splash: 101
For BLF/List
100 (Ring tone 1)
101 (Ring tone 2)
102 (Ring tone 3)
103 (Ring tone 4)
104 (Ring tone 5)
105 (Ring tone 6)
106 (Ring tone 7)
107 (Ring tone 8)
108 (Ring tone 9)
109 (Ring tone 10)
110 (Ring tone 11)
111 (Ring tone 12)
112 (Ring tone 13)
113 (Ring tone 14)
114 (Ring tone 14)
115 (Silence)
41-001343-02 REV05 – 07.2014