Aastra 6730i Administrator's Manual page 267

Setting Time Server Using the Aastra Web UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time Servers 1, 2, and/or 3.
Aastra Web UI
1. Click on Basic Settings->Preferences->Time and Date Setting.
To enable/disable Time Server:
2. The "NTP Time Server" field is enabled by default. If you need to disable the Time Server, uncheck the box. The Time Server 1, 2, and 3 fields
are grayed out when disabled.
To set Time Server 1, 2, and/or 3:
3. Note:
The "Time Server" field must be enabled to enter values in the "Time Server 1, 2, and 3" fields.
In the "Time Server 1", "Time Server 2", and/or "Time Server 3" field(s), enter the IP address of the Time Server 1, 2, and/or 3 in your net-
work, in dotted decimal format.
For example, 132.234.5.4
4. Click Save Settings to save your changes.
41-001343-02 REV05 – 07.2014
Operational Features
5-26