Call Hold Reminder Timer & Frequency - Aastra 6730i Administrator's Manual

Operational Features
Call Hold Reminder Timer & Frequency
There are two parameters an Administrator can set on the IP Phones along with the "call hold reminder" and "call hold
reminder during active calls" parameters:
• call hold reminder timer
• call hold reminder frequency
These parameters specify the time delay and time frequency of the ring splash that sounds when you are on an active
call and have placed another call on hold. You can configure these parameters using the configuration files only.
Notes:
• You must enable the "call hold reminder" and/or "call hold reminder during active calls" parameter(s) for the
above parameters to work.
• A value of "0" for the "call hold reminder timer" parameter disables the call hold reminder feature.
• A value of "0" for the "call hold reminder frequency" parameter prevents additional rings.
Configuring "Call Hold Reminder Timer"
You use the following procedure to configure the "Call Hold Reminder Timer".
Configuration Files
For the specific parameter you can set in the configuration files for setting the "Call Hold Reminder Timer", see Appendix A, the section,
Reminder Settings" on page A-123.
Configuring "Call Hold Reminder Frequency"
You use the following procedure to configure the "Call Hold Reminder Frequency".
Configuration Files
For the specific parameter you can set in the configuration files for setting the "Call Hold Reminder Frequency", see Appendix A, the section,
Reminder Settings" on page A-123.
5-69
"Call Hold
"Call Hold
41-001343-02 REV05 – 07.2014