Aastra 6730i Administrator's Manual page 629

Parameter –
auto resync time
Description
Format
Default Value
Range
Example
Parameter–
auto resync max delay
Description
Format
Default Value
Range
Example
Parameter–
auto resync days
Description
Format
Default Value
Range
Example
41-001343-02 REV05 – 07.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Sets the time of day in a 24-hour period for the IP phone to be automatically updated.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When selecting a value for this parameter in the Aastra Web UI, the values are in 30-
minute increments only.
• When entering a value for this parameter using the configuration files, the value can be
entered using minute values from 00 to 59 (for example, the auto resync time can be
entered as 02:56).
• Auto-Resync adds up to 15 minutes random time to the configured time. For example,
if the auto resync time parameter is set to 02:00, the event takes place any time between
02:00 and 02:15.
• When the language on the phone is set to French or Spanish, you must enter the time
in the format "00h00" (configuration files only).
hh:mm
00h00 (for French and Spanish configuration files)
00:00
hh = 00 to 23
mm = 00 to 59
auto resync time: 03:24
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the maximum time, in minutes, the phone waits past the scheduled time before
starting a checksync.
Integer
15
0-1439
auto resync max delay: 20
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the amount of days that the phone waits between checksync operations.
Note:
A value of 0 causes the phone to checksync every time the clock reads the proper time. A
value of 1 forces the phone to wait 24 hours prior to doing the first checksync.
Integer
0
0-364
auto resync days: 1
Operational, Basic, and Advanced Parameters
A-23