Aastra 6730i Administrator's Manual page 238

Configuration Server Protocol
IP Phone UI
HTTP Settings
• Press HTTP Server.
• Enter the IP address of the HTTP server.
• Press HTTP Port.
• Enter the HTTP port that the server uses to load the configuration to the phone over HTTP. Default is 80.
• Press HTTP Path.
• Enter the path name for which the configuration files reside on the HTTP server for downloading to the IP
Phone. If the IP phone's files are located in a sub-directory beneath the server's root directory, the relative path
to that sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6757i\configfiles.
HTTPS Settings
• Press HTTPS Server.
• Enter the IP address of the HTTPS server.
• Press HTTPS Port.
• Enter the HTTPS port that the server uses to load the configuration to the phone over HTTPS. Default is 443.
• Press HTTPS Path.
• Enter the path name for which the configuration files reside on the HTTPS server for downloading to the IP
Phone. If the IP phone's files are located in a sub-directory beneath the server's root directory, the relative path
to that sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6757i\configfiles.
• Press HTTPS Client Method.
• Select the client method to use for downloading the configuration files (SSl 3.0 or TLS 1.0). For more informa-
tion about which client method to use, see the section,
8.
Press until the Options List screen displays.
9. Press Restart to restart the phone for the change to take affect.
For the 6867i:
IP Phone UI
1.
Press on the phone to enter the Options List.
2. Press the Advanced softkey.
3. Enter the Administrator password using the keypad. Default is "22222".
4. Select Configuration Server.
5. In the Download Protocol field,select the protocol you want the phone to use for downloading from the configuration server. Valid values
are:
• TFTP (Default)
• FTP
• HTTP
• HTTPS
The IP phone uses the protocol you select to download new firmware and configuration files from the configuration server.
6. After selecting the download protocol, you must identify specific parameters for that specific protocol.
4-91
"HTTPS Client/Server Configuration" on page 4-33.
41-001343-02 REV05 – 07.2014