Aastra 6730i Administrator's Manual page 293

You can lock and unlock keys using the configuration files only. When viewing the locked key via the Aastra Web UI, the
key is grayed out (disabled) and cannot be changed. Locking is dynamic for XML pushes.
You use the following "locking" parameters in the configuration files to lock the softkeys and/or programmable keys on all
the phones. If no key settings are configured locally, the locking parameters impact existing softkey and programmable
key parameters defined in the configuration files as detailed in the table below.
Locking Parameter
softkeyN locked
topsoftkeyN locked
prgkeyN locked
pnhkeypadN locked
featurekeyN locked
expmodX keyN locked
hardkeyN locked
Note:
The 3-line LCD phones prevent users from setting a Speeddial key via the Phone UI on a key that has been locked.
Locking the IP Phone Keys using the Configuration Files
Use the following procedures to lock the softkeys and programmable keys on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the
41-001343-02 REV05 – 07.2014
Impacted Parameters
softkeyN type
softkeyN label
softkeyN value
softkeyN line
softkeyN states
topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line
prgkeyN type
prgkeyN value
prgkeyN line
pnhkeypadN value
pnhkeypadN line
featurekeyN type
featurekeyN label
expmodX keyN type
expmodX keyN label (M675i only)
expmodX keyN value
expmodX keyN line
hardkeyN type
hardkeyN value
hardkeyN line
Applicable Phone Models
9480i
9480i CT
6735i
6737i
6739i
6755i
6757i
6757i CT
6867i
6737i
6757i
6757i CT
6867i
9143i
6730i
6731i
6735i
6753i
6755i
6863i
6865i
All IP phone models
9480i CT
6757i CT
6700i and 6800i-series phones only
(not applicable to the 6730i, and 6731i)
6867i
section,"Locking Keys" on page A-189.
Operational Features
5-52