IP Phone UI
9.
Enter the IP address of the protocol server (in dotted decimal format).
Use the following table to configure the applicable server.
TFTP Settings
•
Select Primary TFTP
•
Enter the IP address or fully qualified domain name of the primary TFTP server.
•
Press Done or Set to save the change.
•
Select Pri TFTP Path.
•
Enter the path name for which the configuration files reside on the TFTP server for downloading to the IP
Phone. If the IP phone's files are located in a sub-directory beneath the server's root directory, the relative path
to that sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6757i\configfiles.
•
Optional: You can also configure an Alternate TFTP server and Alternate TFTP Path if required by selecting the
"Alternate TFTP" and the "Alt TFTP Path" parameters.
•
From the TFTP Settings menu, select Alternate TFTP and press Enter.
•
Enter the IP address or fully qualified domain name of the alternate TFTP server.
•
Press Done or Set to save the change.
•
Select Alt TFTP Path.
•
Enter the path name for which the configuration files reside on the Alternate TFTP server for downloading to
the IP Phone. If the IP phone's files are located in a sub-directory beneath the server's root directory, the relative
path to that sub-directory should be entered in this field. Enter the path name in the form
folderX\folderX\folderX. For example, ipphone\6757i\configfiles.
FTP Settings
•
Select FTP Server.
•
Enter the IP address or fully qualified domain name of the FTP server.
•
Press Done or Set to save the change.
•
Select FTP Path.
•
Enter the path name for which the configuration files reside on the FTP server for downloading to the IP Phone.
If the IP phone's files are located in a sub-directory beneath the server's root directory, the relative path to that
sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For exam-
ple, ipphone\6757i\configfiles.
•
Optional: You can enter a username and password for accessing the FTP server if required:
•
Select FTP Username.
•
Enter a username for accessing the FTP server.
•
Press Done.
•
Select FTP Password.
•
Enter a password for accessing the FTP server.
•
Press Done or Set.
41-001343-02 REV05 – 07.2014
Configuration Server Protocol
4-88