Aastra 6730i Administrator's Manual page 131

6700i series, 6800i series, 9000i series
Hide thumbs Also See for 6730i:
Table of Contents

Advertisement

Parameter in
Aastra Web UI
N/A
AS-Feature-Event Subscription
(Global and Per-Line)
AS-Feature-Event Subscription
Period
Send MAC Address in REGISTER
Message
Send Line Number in REGISTER
Message
Session Timer
Timer 1 and Timer 2
Transaction Timer
41-001343-02 REV05 – 07.2014
Parameters in Configuration Files
sip missed call summary subscrip-
tion period
sip as-feature-event subscription
(global)
sip lineN as-feature-event subscrip-
tion
(per-line)
sip as-feature-event subscription
period
sip send mac
sip send line
sip session timer
sip T1 timer
sip T2 timer
sip transaction timer
Administrator Level Options
Description
Specifies the amount of time, in seconds, that the phone uses the Missed
Calls Summary Subscription feature. This parameter is always enabled with
a default value of 86400 seconds. When the phone reaches the limit set for
this parameter, it sends the subscription again.
For more information about this parameter, see Chapter 6, the section,
"Missed Call Summary Subscription"
Enables or disables the specified line with the BroadSoft's server-side DND,
CFWD, or ACD features.
For more information about this parameter, see Chapter 6, the section,
Feature-Event Subscription"
on page 6-11.
Specifies the amount of time, in seconds, between re-subscribing. If the
phone does not re-subscribe in the time specified for this parameter, it
loses subscription.
For more information about this parameter, see Chapter 6, the section,
Feature-Event Subscription"
on page 6-11.
Adds an "Aastra-Mac:" header to the SIP REGISTER messages sent from the
phone to the call server, where the value is the MAC address of the phone.
For more information about this parameter, see Chapter 6, the section,
069 Support"
on page 6-4.
Adds an "Aastra-Line:" header to the SIP REGISTER messages sent from the
phone to the call server, where the value is the line number that is being
registered.
For more information about this parameter, see Chapter 6, the section,
069 Support"
on page 6-4.
The time, in seconds, that the IP phone uses to send periodic re-INVITE
requests to keep a session alive. The proxy uses these re-INVITE requests to
maintain the status' of the connected sessions. See RFC4028 for details.
Default is 0.
For more information, see Chapter 4,
page 4-69.
These timers are SIP transaction layer timers defined in RFC 3261. Timer 1 is
an estimate, in milliseconds, of the round-trip time (RTT). Timer 2 repre-
sents the amount of time, in milliseconds, a non-INVITE server transaction
takes to respond to a request.
For more information, see Chapter 4,
page 4-69.
The amount of time, in milliseconds that the phone allows the call server
(registrar/proxy) to respond to SIP messages that it sends. If the phone
does not receive a response in the amount of time designated for this
parameter, the phone assumes the message has timed out.
For more information, see Chapter 4,
page 4-69.
on page 6-10.
"As-
"As-
"TR-
"TR-
"Advanced SIP Settings (optional)"
on
"Advanced SIP Settings (optional)"
on
"Advanced SIP Settings (optional)"
on
3-39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents