Aastra 6730i Administrator's Manual page 752

Operational, Basic, and Advanced Parameters
Parameter –
sip intercom prefix code
Description
Format
Default Value
Range
Example
Parameter –
sip intercom line
Description
Format
Default Value
Range
Example
Incoming Intercom Settings
Parameter –
sip allow auto answer
Description
Format
Default Value
Range
Example
A-146
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
The prefix to add to the phone number for server-side outgoing Intercom calls. This
parameter is required for all server-side Intercom calls.
Note:
The example below shows *96 for the prefix code which is used for Sylantro servers.
String
Not Applicable
Not Applicable
sip intercom prefix code: *96
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the line for which the IP phone uses the configuration from, when making the
Intercom call. The IP phone uses the first available line for physically making the call but
uses the configuration from the line you set for this parameter.
Note:
The "sip intercom type" parameter must be set with the Server-Side option to enable the
"sip intercom line" parameter.
Integer
1
Line 1 through 9
sip intercom line: 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables or disables the IP phone to allow automatic answering for an Intercom call. If
auto-answer is enabled on the IP phone, the phone plays a tone to alert the user before
answering the intercom call. If auto-answer is disabled, the phone treats the incoming
intercom call as a normal call.
Boolean
1 (true)
0 (false - do not allow auto-answer)
1 (true - allow auto-answer)
sip allow auto answer: 0
41-001343-02 REV05 – 07.2014