Aastra 6730i Administrator's Manual page 383

After configuring the BLF/List URI and BLF/List keys, you can enable ring tone playback on the BLF/List-monitored exten-
sions by defining the existing "play a ring splash" parameter as "1" in the respective configuration file.
Note:
The "play a ring splash" parameter is not dynamic. Changes to this parameter will take effect only after the phone has
been rebooted.
Additionally, the following "ring splash" parameters can be used to control which specific ring tone is played (depending
on the type of key for which BLF/List functionality is configured):
• softkeyN ring splash
• prgkeyN ring splash
• topsoftkeyN ring splash
• expmodX keyN ring splash
Applicable values for the above parameters include:
• 100 (Ring tone 1)
• 101 (Ring tone 2)
• 102 (Ring tone 3)
• 103 (Ring tone 4)
• 104 (Ring tone 5)
• 105 (Ring tone 6)
• 106 (Ring tone 7)
• 107 (Ring tone 8)
• 108 (Ring tone 9)
• 109 (Ring tone 10)
• 110 (Ring tone 11)
• 111 (Ring tone 12)
• 112 (Ring tone 13)
• 113 (Ring tone 14)
• 114 (Ring tone 15)
• 115 (Silence)
Note:
Ring tones are based on the current ring tone set configured on the IP phone.
Examples
To enable ring tone 3 playback for a BLF/List-monitored extension configured on a soft/prg/topsoft/expmodX "key1", add
the following parameters in the respective configuration file:
For Softkeys
play a ring splash: 1
softkey1 type: list
softkey1 ring splash: 102
For Programmable Keys
play a ring splash: 1
prgkey1 type: list
prgkey1 ring splash: 102
41-001343-02 REV05 – 07.2014
Operational Features
5-142