Action Uri Settings - Aastra 6730i Administrator's Manual

Operational, Basic, and Advanced Parameters
Parameter –
xml status scroll delay
Description
Format
Default Value
Range
Example

Action URI Settings

Parameter –
action uri startup
Description
Format
Default Value
Range
Example
Parameter –
action uri registered
Description
Format
Default Value
Range
Example
A-116
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the length of time, in seconds, that each XML status message displays on the
phone.
Note:
Changes to this parameter are applied immediately.
Integer
5
1 to 25
xml status scroll delay: 3
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the URI for which the phone executes a GET on when a startup event occurs. This
parameter can use any of the following variables:
$$DISPLAYNAME$$
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
$$LINESTATE$$
$$LOCALIP$$
$$REGISTRATIONSTATE$$
$$REGISTRATIONCODE$$
Fully qualified URI
Not Applicable
Up to 128 ASCII characters
action uri startup: http://10.50.10.140/startup
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the URI for which the phone executes a GET on when a successful registration event
occurs. This parameter can use the following variables:
$$SIPUSERNAME$$
$$SIPAUTHNAME$$
$$PROXYURL$$
$$LINESTATE$$
$$LOCALIP$$
Note:
The "action uri registered" parameter executes on the first successful registration of each
unique line configured on the phone.
Fully qualified URI
Not Applicable
Up to 128 ASCII characters
action uri registered: http://10.50.10.14/registered.php?auth name=$$SIPAUTHNAME$$
41-001343-02 REV05 – 07.2014