Aastra 6730i Administrator's Manual page 627

Parameter –
https server
Description
Format
Default Value
Range
Example
Parameter –
https path
Description
Format
Default Value
Range
Example
Parameter –
https port
Description
Format
Default Value
Range
Example
41-001343-02 REV05 – 07.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
The HTTPS server's IP address. This will become effective after this configuration file has
been downloaded into the phone.
Optional: You can also assign an HTTPS relative path to the HTTPS server. See the next
parameter (https path).
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
IP address or Fully Qualified Domain Name
0.0.0.0
Not Applicable
https server: 192.168.0.143
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
The HTTPS path name to enter.
If the IP phone's configuration and firmware files are located in a sub-directory beneath
the server's HTTPS root directory, the relative path to that sub-directory should be
entered in this field.
dir/dir/dir
Not Applicable
Up to 256 alphanumeric characters
https path: ipphones/6755i
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the HTTPS port that the server uses to load the configuration to the phone
over HTTPS.
Note:
For DHCP to automatically populate this parameter, your DHCP server must support
Option 66.
Integer
443
1 through 65535
https port: 1025
Operational, Basic, and Advanced Parameters
A-21