Xml Uri For Key Press Simulation; Reject Inv Or Bye When Unsupported Value In Require Header - Aastra 6730i Administrator's Manual

Advanced Operational Features
By default, the IP Phones use the long format. However, an Administrator can provision the short (compact) format using
the configuration files. The Aastra Web UI does not support this configuration feature.
Enabling/Disabling the Compact SIP Headers Feature
Use the following procedure to enable/disable the Compact SIP Header in the SIP packet.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,

Reject INV or BYE when Unsupported Value in REQUIRE Header

The IP Phones support the following parameter:
• sip enforce require hdr
This parameter allows you to enable (1) or disable (0) the rejection of an INV or BYE with a "420 Bad Extension" if the INV
or BYE contains an unsupported value in the REQUIRE header.
Enabling/Disabling a Rejection of the INV or BYE
Use the following procedure to enable/disable the rejection of the INV or BYE if the INV or BYE contains an unsupported
value in the REQUIRE header.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,

XML URI for Key Press Simulation

The phones provide a feature that allow an XML Developer or Administrator to define XML Key URIs that can send key
press events to the phone, just as if the physical hard key, softkey, or programmable key were pressed on the phone.
When the Key URI event is sent from the server to the phone, the phone initiates the event as if the key was physically
pressed. If the key is not present on the phone (hard key) or not available (softkey or programmable key), when the
phone receives the URI, the event is discarded. If you are in the process of changing the softkey or programmable key
setting, or the key is disabled while the event is being processed, the request is discarded. The phone maps key events to
its physical keys and not to its mapped logical keys.
The following table identifies the XML URIs for pressing buttons on the phone..
XML Key URI
Line Keys
Key:Line1 to Key:Line<n>
Keypad Keys
Key:KeyPad0 to Key:KeyPad9
Key:KeyPadStar
Key:KeyPadPound
Softkeys
6-34
"Compact SIP Header"
"Rejection of INV or BYE"
Description
Line 1 to <n>Keys
Note:
The phone ignores URI line key events if the line keys are not physically present on
the phone.
Numeric Keypad Keys 0-9
* - Star Key
# Hash Key
on page A-217.
on page A-217.
41-001343-02 REV05 – 07.2014