Aastra 6730i Administrator's Manual page 500

Operational Features
Aastra Web UI
12. (Optional) You can poll a URI at specific intervals on the phones. For more information about polling Action URIs, see
on page 5-259.
13. Click Save Settings to save your changes.
Polling Action URIs
Another way to reach a phone behind a NAT/firewall is to have the phone make an XML call at periodic intervals. An
Administrator can use the action uri poll parameter that commands the phone to perform an XML call at configurable
intervals.
An Administrator can specify the URI to be called and specify the interval between polls using the configuration files or
the Aastra Web UI. Configuration of this feature is dynamic (no reboot required).
Configuring Polling Action URI via the Configuration Files
Use the following parameters to configure the polling Action URI on the IP Phones.
• action uri poll
• action uri poll interval
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
Configuring Polling Action URI via the Aastra Web UI
Use the following procedure to configure polling Action URI using the Aastra Web UI.
Aastra Web UI
1. Click on Advanced Settings->Action URI.
2. In the "Poll" field, enter a URI to be called every "action uri pool interval" seconds. Enter the value in a URI format. For example,
http://myserver.com/myappli.xml.
5-259
"Polling Action URIs"
"Polling Action URI Settings" on page A-119.
41-001343-02 REV05 – 07.2014