Aastra 6730i Administrator's Manual page 313

For 8 and 11-line LCD phones
If you enable this parameter, and the phone receives another call when an active call is already present, the phone displays
softkey 1 as "answer" and softkey 2 as "ignore". You can press the required softkey as applicable.
For 3-line LCD phones
If you disable this parameter, and the phone receives another call when an active call is already present, the "ignore"
option displays in the LCD window. The phone will ignore the incoming call if you press the DOWN arrow navigation key.
The phone will hang up on the active call if you press the Goodbye key.
You can set this parameter using the configuration files or the Aastra Web UI.
Configuring the Goodbye Key to Cancel Incoming Calls
Use the following procedures to configure the behavior of the Goodbye Key on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling the behavior of the Goodbye Key, see Appendix A, the section,
"Goodbye Key Cancels Incoming Call"
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. Enable or disable the "Goodbye Key Cancels Incoming Call" field by checking or unchecking the check box.
3. Click Save Settings to save your changes.
41-001343-02 REV05 – 07.2014
on page A-126.
Operational Features
5-72