Configuring Object Groups; Overview; Feature And Hardware Compatibility; Configuring An Ipv4 Address Object Group - HP MSR Series Configuration Manual

Configuring object groups

Overview

An object group is a group of objects that can be used by an object policy or object group to identify
packets. Object groups are divided into the following types:
•
IPv4 address object group—A group of IPv4 address objects used to match the IPv4 address
in a packet.
•
IPv6 address object group—A group of IPv6 address objects used to match the IPv6 address
in a packet.
•
Port object group—A group of port objects used to match the protocol port number in a
packet.
•
Service object group—A group of service objects used to match the upper-layer service in a
packet.

Feature and hardware compatibility

Hardware
MSR954(JH296A/JH297A/JH299A)
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080

Configuring an IPv4 address object group

Step
1. Enter system view.
2. Configure an IPv4 address
object group and enter its
view.
3. (Optional.) Configure a
description for the IPv4
address object group.
4. Configure an IPv4 address
object.
Object group compatibility
No
Yes
Yes
Yes
Yes
Yes
Command
system-view
object-group ip address
object-group-name
description text
[ object-id ] network { host
{ address ip-address | name
host-name } | subnet ip-address
{ mask-length | mask } | range
ip-address1 ip-address2 |
group-object
object-group-name }
470
Remarks
N/A
The system has one default IPv4
address object group.
By default, an object group does
not have a description.
By default, no object exists in a
user-defined object group.