Table of Contents
Advertisement
4.11.3 Switching BIOS
The IMBA-Q170-i2 equips with dual BIOS to support flexible I/O configuration. To switch
BIOS1 to BIOS2 or BIOS2 to BIOS1 successfully, please follow the steps below and refer
to Figure 4-18 and Table 4-2 for the BIOS switch location and settings.
Step 1:
Unplug the system power cord.
Step 2:
Switch BIOS1 to BIOS2 or BIOS2 to BIOS1 by moving the BIOS switch to
BIOS1 or BIOS2 position as shown in Figure 4-18.
Step 3:
Remove the on-board battery, and then reinstall it.
Step 4:
Clear CMOS by pressing the clear CMOS button for three seconds or more.
Step 5:
Perform the system booting.
NOTE:
The user can check which BIOS is being used from the BIOS Number
item in the Main BIOS menu (BIOS Menu 1).
Figure 4-18: BIOS1/BIOS2 Switch Location
Setting
1-2
2-3
Table 4-2: BIOS1/BIOS2 Switch Settings
Page 76
IMBA-Q170-i2 ATX Motherboard
Step 0:
Description
BIOS1 (default)
BIOS2
Advertisement
Table of Contents
