Half-Size Pcie Mini Card Installation; Figure 4-11: Installing The Standoff - IEI Technology IMBA-Q170-i2 User Manual

4.8 Half-size PCIe Mini Card Installation

The PCIe Mini card slot allows installation of either a full-size or half-size PCIe Mini card.
To install a half-size PCIe Mini card, please follow the steps below.
Step 1: Locate the PCIe Mini card slot. See Chapter 3.
Step 2: Install the standoff to the screw hole for the half-size PCIe Mini card. Install
the supplied standoff to the screw hole for the half-size PCIe Mini card
(Figure 4-11).

Figure 4-11: Installing the Standoff

Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch on
the slot. Slide the PCIe Mini card into the slot at an angle of about 20º (Figure 4-12).
Page 70
IMBA-Q170-i2 ATX Motherboard