Getting Help; Unable To Reboot After Configuration Changes; Table 5-1: Bios Navigation Keys - IEI Technology IMBA-Q170-i2 User Manual

Key Function
- Decrease the numeric value or make changes
Page Up Move to the previous page
Page Dn Move to the next page
Esc Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
F1 General help, only for Status Page Setup Menu and Option
Page Setup Menu
F2 Load previous values
F3 Load optimized defaults
F4 Save changes and Exit BIOS

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When F1 is pressed a small help window describing the appropriate keys to use and the
possible selections for the highlighted item appears. To exit the Help Window, press the
E key.
SC

5.1.4 Unable to Reboot after Configuration Changes

If the computer cannot boot after changes to the system configuration is made, CMOS
defaults. Use the clear CMOS button described in Chapter 4.
Page 90
IMBA-Q170-i2 ATX Motherboard