Chassis Intrusion Connector; Figure 3-6: Chassis Intrusion Connector Location; Table 3-6: Chassis Intrusion Connector Pinouts - IEI Technology IMBA-Q170-i2 User Manual

3.2.5 Chassis Intrusion Connector

CN Label: CHASSIS1
2-pin header, p=2.54 mm
CN Type:
CN Location: See
CN Pinouts: See Table 3-6
The chassis intrusion connector is for a chassis intrusion detection sensor or switch that
detects if a chassis component is removed or replaced.

Figure 3-6: Chassis Intrusion Connector Location

Pin Description
1 +3.3VSB
2 CHASSIS OPEN

Table 3-6: Chassis Intrusion Connector Pinouts

Page 24
IMBA-Q170-i2 ATX Motherboard
F igure 3-6
6