Features And Benefits; Accessing The Intel® Matrix Storage Manager - IEI Technology IMBA-Q170-i2 User Manual

CAUTION!
Do not accidentally disconnect the SATA drive cables. Carefully route
the cables within the chassis to avoid system down time.
G.2 Features and Benefits
Supports RAID levels 0, 1, 5 and 10
Supports connectivity to two or more disk drives
G.3 Accessing the Intel® Matrix Storage Manager
To access the Intel
Step 1: Connect SATA drives to the system. Connect two or more SATA drives to the
system. Make sure the drives have the same capacity, are the same type and
have the same speed.
NOTE:
Make sure the SATA drives are EXACTLY the same when they are
configured in a RAID configuration. If they are not the same size, disk
drive capacity is sacrificed and overall performance affected.
Step 2: Enable SATA drives in BIOS. Start the computer and access the BIOS setup
program. Enable RAID support for all SATA devices. Refer to the applicable
BIOS configuration section in this user manual.
Step 3: Configure "Option ROM Messages" BIOS option to Force BIOS. This is to
allow the "Press <CTRL+I> to enter Configuration Utility......" message to
appear during the POST. Refer to the applicable BIOS configuration section in
this user manual.
Page 162
®
Matrix Storage Manager, please follow the steps below.
IMBA-Q170-i2 ATX Motherboard