IEI Technology IMBA-Q170-i2 User Manual page 121

IMBA-Q170-i2 ATX Motherboard
Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Auto
IO=378h;
IRQ=5
IO=378h;
IRQ=5, 6, 7,
9, 10, 11, 12
IO=278h;
IRQ=5, 6, 7,
9, 10, 11, 12
IO=3BCh;
IRQ=5, 6, 7,
9, 10, 11, 12
IO=378h
IO=278h
IO=3BCh
Device Mode [STD Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
STD Printer Mode
SPP Mode
EPP-1.9 and SPP Mode
EPP-1.7 and SPP Mode
ECP Mode
ECP and EPP 1.9 Mode
ECP and EPP 1.7 Mode
D The parallel port IO port address and interrupt
EFAULT
address are automatically detected.
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5, 6, 7, 9, 10, 11, 12
Parallel Port I/O port address is 278h and the
interrupt address is IRQ5, 6, 7, 9, 10, 11, 12
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ5, 6, 7, 9, 10, 11, 12
Parallel Port I/O port address is 378h
Parallel Port I/O port address is 278h
Parallel Port I/O port address is 3BCh
Default
Page 105