Intel ® Amt Setup Procedure; Figure 4-24: Update Process Is Complete - IEI Technology IMBA-Q170-i2 User Manual

Step 8: Wait for the process to finish. It may take up to 15 minutes.

Figure 4-24: Update Process is Complete

Step 9: Now the user can proceed with the Windows 7 installation using the updated
installer.
®
4.14 Intel AMT Setup Procedure
The IMBA-Q170-i2 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
Step 1: Make sure at least one of the memory sockets is installed with a DDR4 DIMM.
Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN1_USB1.
Step 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,
Step 4: Properly install the Intel® Management Engine Components drivers from the
iAMT Driver & Utility directory in the driver CD.
Step 5: Configure the Intel® Management Engine BIOS extension (MEBx). To get into
the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up
process. Enter the Intel® current ME password as it requires (the Intel® default
password is admin).
Page 84
Step 0:
Step 0:
IMBA-Q170-i2 ATX Motherboard