Table of Contents
Advertisement
a. Copy the Ipmitool.exe file to a bootable USB flash drive.
b. Insert the USB flash drive to the IMBA-Q170-i2
c. The IMBA-Q170-i2 boots from the USB flash drive
d. Enter the following command: ipmitool 20 30 02 01 03 00 00
(there is a space between each two-digit number)
e. A serial of number shows. The last four two-digit hexadecimal numbers are
the IP address. Convert the hexadecimal numbers to decimal numbers.
Step 2:
On the remote management console, open a web browser. Enter the managed
system IP address in the web browser (Figure 4-25).
Figure 4-25: IEI iMAN Web Address
Step 3:
The login page appears in the web browser.
Step 4:
Enter the user name and password to login the system. The default login
username and password are:
-Username: admin
-Password: admin
Step 5:
Press the login button to login the system.
Step 6:
The IEI iMAN Web Interface appears.
Page 86
IMBA-Q170-i2 ATX Motherboard
S t e p 0 :
Advertisement
Table of Contents
