Serial Port N Configuration; Serial Port 1 Configuration - IEI Technology IMBA-Q170-i2 User Manual

5.3.4.1 Serial Port n Configuration

Use the Serial Port n Configuration menu (BIOS Menu 7) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Advanced
Serial Port n Configuration
Serial Port
Device Settings
Change Settings
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
BIOS Menu 7: Serial Port n Configuration Menu

5.3.4.2 Serial Port 1 Configuration

Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Disabled
Enabled
Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto
IO=3F8h;
IRQ=4
Page 98
IMBA-Q170-i2 ATX Motherboard
[Enabled]
IO=3F8h; IRQ=4
[Auto]
Disable the serial port
D Enable the serial port
EFAULT
The serial port IO port address and interrupt address
D
EFAULT
are automatically detected.
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ4
Enable or Disable Serial
Port (COM)
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit