Clearing Cmos; Figure 4-17: Clear Cmos Button And Header Locations - IEI Technology IMBA-Q170-i2 User Manual

IMBA-Q170-i2 ATX Motherboard

4.11.2 Clearing CMOS

To reset the BIOS, remove the on-board battery and press the J_CMOS1 button for three
seconds or more. In addition, the J_CMOS2 header provides an additional clear CMOS
button that can be connected to the chassis, allowing users to clear CMOS without
opening the system chassis. The clear CMOS button and header locations are shown in
Figure 4-17.
NOTE:
After switching the BIOS1 to BIOS2 or BIOS2 to BIOS1, the user has to
clear the CMOS settings. Please refer to Section 4.11.3 for how to
switch BIOS settings.

Figure 4-17: Clear CMOS Button and Header Locations

Page 75