Figure 4-15: Pciex4_3 Slot Location - IEI Technology IMBA-Q170-i2 User Manual

IMBA-Q170-i2 ATX Motherboard
Step 1: Install the expansion card to the PCIEX4_3 slot on the motherboard. Align
and insert the PCIe edge connector on the bottom of the expansion card to the
PCIEX4_3 slot (Figure 4-15) on the IMBA-Q170-i2. Then, push down gently on
the expansion card to make sure it is firmly inserted into the PCIEX4_3 slot.

Figure 4-15: PCIEX4_3 Slot Location

Step 2: Configure the BIOS settings. To use the expansion card, the user has to apply
the BIOS2 settings to the motherboard and configure the BIOS settings through
the BIOS menu in "Chipset
Configuration". Please refer to Section 4.11.3 for details on how to switch to
BIOS2 settings and Section 5.4.2.1 for details on how to configure BIOS settings.
NOTE:
If a PCIe Mini card that requires USB 2.0 signal (such as a PCIe Mini to
USB 2.0 adapter card) is installed on this expansion card, the included
USB cable has to be connected to the USB headers on the expansion
card and motherboard. However, the IMBA-Q170-i2 has only two
on-board USB 2.0 headers. The user has to choose either to install the
USB 3.0 expansion card or the PCIe Mini and mSATA expansion card.
PCH-IO Configuration PCI Express
Page 73