Table of Contents
Advertisement
Step 1:
Install the expansion card to the PCIEX4_2 slot on the motherboard. Align
and insert the PCIe edge connector on the bottom of the expansion card to the
PCIEX4_2 slot (Figure 4-14) on the IMBA-Q170-i2. Then, push down gently on
the expansion card to make sure it is firmly inserted into the PCIEX4_2 slot.
Figure 4-14: PCIEX4_2 Slot and USB Header Locations
Step 2:
Connect the included USB cables to the expansion card and motherboard.
Connect the two included USB cables to the USB headers (USB1 and USB2) on
the expansion card and motherboard (Figure 4-14).
Step 3:
Load the BIOS2 settings. To use the expansion card, the user has to apply the
BIOS2 settings to the motherboard. Please refer to Section 4.11.3 for details on
how to switch to BIOS2 settings.
4.10 PCIe Mini and mSATA Expansion Card Installation
IEI provides an optional PCIe Mini and mSATA expansion card that allows additional PCIe
Mini and mSATA cards to be installed to the motherboard. To install the expansion card,
please follow the steps below.
Page 72
IMBA-Q170-i2 ATX Motherboard
Step 0:
Advertisement
Table of Contents
