Msata Setup; Figure 4-20: Msata Setup Jumper Location; Table 4-5: Msata Setup Jumper Settings - IEI Technology IMBA-Q170-i2 User Manual

IMBA-Q170-i2 ATX Motherboard

4.11.6 mSATA Setup

The mSATA setup jumper specifies whether to automatically detect the mSATA device
installed in the PCIe Mini slot (MPCIE1). If the user shorts the mSATA setup jumper to
force the system to enable mSATA device, the S_ATA6 connector will be disabled.
Setting
Open
Short 1-2

Table 4-5: mSATA Setup Jumper Settings

Figure 4-20: mSATA Setup Jumper Location

Description
Automatically detect mSATA device (default)
Force to enable mSATA device
(The S_ATA6 connector will be disabled)
Page 79