Table of Contents
Advertisement
IO=2E8h;
IRQ=3, 4, 11
IO=2D0h;
IRQ=3, 4, 11
IO=2E0h;
IRQ=3, 4, 11
Transfer Mode [RS232]
The serial port 6 allows setting the data transfer mode to RS-232, RS-422 or RS-485.
5.3.4.5 Parallel Port Configuration
Use the Parallel Port Configuration menu (BIOS Menu 8) to configure the parallel port.
Aptio Setup Utility – Copyright (C) 2016 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
Version 2.17.1255. Copyright (C) 2016 American Megatrends, Inc.
BIOS Menu 8: Parallel Port Configuration Menu
Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.
Disabled
Enabled
Page 104
IMBA-Q170-i2 ATX Motherboard
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ3, 4, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ3, 4, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ3, 4, 11
[Enabled]
IO=378h; IRQ=5
[Auto]
[STD Printer Mode]
Disable the parallel port
Enable the parallel port
D
EFAULT
Enable or Disable
Parallel Port (LPT/LPTE)
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
Advertisement
Table of Contents
