Mellanox Technologies Switch-IB User Manual page 20

12. Copper InfiniBand Cable Connecting/Disconnecting
Copper InfiniBand cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for spe-
cial warnings/instructions.
13. Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with equip-
ment starting from the bottom to the top.
14. Equipment Installation
This equipment should be installed, replaced, and/or serviced only by trained and qual-
ified personnel.
15. Equipment Disposal
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
16. Local and National Electrical Codes
This equipment should be installed in compliance with local and national electrical
codes.
17. Installation Codes
This device must be installed according to the latest version of the country national
electrical codes. For North America, equipment must be installed in accordance to the
applicable requirements in the US National Electrical Code and the Canadian Electri-
cal Code.
18. Battery Replacement
Warning: Replace only with UL Recognized battery, certified for maximum abnormal
charging current not less than 4mA
There is a risk of explosion should the battery be replaced with a battery of an incorrect
type.
Dispose of used batteries according to the instructions.
Mellanox Technologies
Installation
21