Figure 7: Installation Options; Figure 8: Attaching The Rails To The Chassis - Mellanox Technologies SB7700 User Manual

Attach the left and right rack mount rails (A) to the switch, by gently pushing the switch chas-
Step 1.
sis' pins through the slider key holes, until locking occurs. Secure the chassis in the rails,
screwing 2 flat head Phillips screws (E) in the designated points. See Figure 8.

Figure 8: Attaching the Rails to the Chassis

Attach the left and right rack mount brackets (B) to the switch, by gently pushing the switch
Step 2.
chassis' pins through the slider key holes, until locking occurs. Secure the system in the brack-
ets by screwing the remaining 2 flat head Phillips screws (E) in the designated points. See
Figure 9.

Figure 7: Installation Options

Mellanox Technologies
Rev 1.2
17