Rev 1.2
Attach the left and right rack mount rails (A) to the switch, by gently pushing the switch chas-
Step 1.
sis' pins through the slider key holes, until locking occurs.
Secure the chassis in the rails by screwing 2 flat head Phillips screws (E) in the designated
Step 2.
points with a torque of 1.5±0.2 Nm. See
Attach the left and right rack mount brackets (B) to the switch, by gently pushing the switch
Step 3.
chassis' pins through the slider key holes, until locking occurs. Secure the system in the brack-
ets by screwing the remaining 2 flat head Phillips screws (E) in the designated points with a
torque of 1.5±0.2 Nm. See
20
Mellanox Technologies
Figure 7: Installation Options
Figure 8: Attaching the Rails to the Chassis
Figure
9.
Figure
8.
Installation