Figure 7: Installation Options; Figure 8: Attaching The Rails To The Chassis - Mellanox Technologies SB7700 User Manual

Attach the left and right rack mount rails (A) to the switch, by gently pushing the switch
Step 1.
chassis' pins through the slider key holes, until locking occurs.
Secure the chassis in the rails, screwing 2 flat head Phillips screws (E) in the designated
Step 2.
points with a torque of 1.5±0.2 Nm. See
Attach the left and right rack mount brackets (B) to the switch, by gently pushing the switch
Step 3.
chassis' pins through the slider key holes, until locking occurs. Secure the system in the
brackets by screwing the remaining 2 flat head Phillips screws (E) in the designated points
with a torque of 1.5±0.2 Nm. See
Rev. 1.7

Figure 7: Installation Options

Figure 8: Attaching the Rails to the Chassis

Figure
Mellanox Technologies
Figure 8.
9.
Installation
20