Mellanox Technologies Switch-IB User Manual page 108

7. Redundant Power Supply Connection - Electrical Hazard
This product includes a redundant power or a blank in its place. In case of a blank
power supply, do not operate the product with the blank cover removed or not securely
fastened.
8. Multiple Power Inlets
Risk of electric shock and energy hazard.
The PSUs are all independent.
Disconnect all power supplies to ensure a powered down state inside of the switch
platform.
9. During Lightning - Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
10. Copper InfiniBand Cable Connecting/Disconnecting
Copper InfiniBand cables are heavy and not flexible, as such they should be carefully
attached to or detached from the connectors. Refer to the cable manufacturer for spe-
cial warnings/instructions.
11. Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with equip-
ment starting from the bottom to the top.
12. Equipment Installation
This equipment should be installed, replaced, and/or serviced only by trained and qual-
ified personnel.
13. Equipment Disposal
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
14. Local and National Electrical Codes
This equipment should be installed in compliance with local and national electrical
codes.
Mellanox Technologies 109