Mellanox Technologies Switch-IB User Manual page 19

4. Installation in Restricted Access Location
This unit is intended for installation in a Restricted Access Location.
5. Risk of Electric Shock
Risk of Electric Shock!
With the fan module removed power pins are accessible within the module cavity.
DO NOT insert tools or body parts into the fan module cavity.
6. Over-temperature
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 40°C (104°F). Moreover, to guarantee proper air
flow, allow at least 8cm (3 inches) of clearance around the ventilation openings.
7. Stacking the Chassis
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
8. Redundant Power Supply Connection – Electrical Hazard
This product includes a redundant power or a blank in its place. In case of a blank
power supply, do not operate the product with the blank cover removed or not securely
fastened.
9. Double Pole/Neutral Fusing
This system has double pole/neutral fusing. Remove all power cords before opening
the cover of this product or touching any internal parts.
10. Multiple Power Inlets
Risk of electric shock and energy hazard.
The PSUs are all independent.
Disconnect all power supplies to ensure a powered down state inside of the switch
platform.
11. During Lightning – Electrical Hazard
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
Mellanox Technologies
Installation
20